How To Replace A Door Handle

Door handles may gradually deteriorate due to constant use or lack of maintenance. It tightens or falls off, and there are times when you have no choice but to replace it. Today’s article will tell you how to replace a door handle.

As you already know, door handles should always be in good condition as they are all about safety. So you need to replace them as soon as you discover a faulty system, to avoid damage. The good thing is that you can do it yourself if you want to save on labor.

What does it take to replace a door handle?

First, you need some tools to remove the door handle. You will need a screwdriver that fits the size of the screws and the type of screws.

You will also need a lubricant to loosen it. In addition, you may need a new handle to replace the old one.

Step by step how to replace a door handle

It is easy to replace a door handle as long as you know what you are doing. You can do that, just follow these step-by-step instructions.

1. Loosen the screws

The first step is to loosen all the screws that hold the door handle in place. You need to remove them both inside and out to be able to pull it out.

The purpose of this first phase is to remove the cover plate that hides the mechanism to release it.

It is important to look at the location of each screw to remember where they should sit when the new door handle is put on.

2. Apply a lubricant if you want to replace a door handle

Spray all remaining parts of the handle to lubricate them. This is to get rid of dirt.

It is also to remove all excess dirt and make room for the new handle.

3. Remove the ball and handle that make up the door handle

Once you have removed the plate, you should be able to see that the handle has a button. This element connects the ball and the handle so that they are attached to each other.

You must press the button to release the two parts and then remove them. Thus, hold the lock down at all times and pull out both parts of the button using a screwdriver.

Then turn the screw so that it starts to come out and the whole handle comes off. Do the same on both sides of the door.

4. Installation of the new door handle

First of all, the new handle should look like the previous one to fit.

Then install the lock. You need to screw it in properly as it is the base that gives the handle stability.

Then put the handle in place. The plate must be screwed around the handle and the rotary knob must be inserted through these two openings to do so. In addition, secure the handle with the latch so that it does not fall off.

As a final step, attach the handle to the other side of the door. Install the second plate, mount the second handle, and then secure the corresponding knob.

How to extend the life of a door handle?

Doors are constantly exposed to weather and dirt. Therefore, it is important to maintain them at least once a month. Apply a lubricant so that the mechanism can move freely.

It is important to be good at your doors when opening and closing them as it will surely hurt them to slam with them. In addition, clean the handles at least once a week with vinegar or a mixture of ammonia and water to keep them shiny.